• <strike id="sbcr7"></strike>
    <tr id="sbcr7"></tr>
  • <th id="sbcr7"></th>

      產品中心&Product Center
      新型圓錐破碎機
      New Type Cone Crusher

      新型圓錐式破碎機:
        新型圓錐式破碎機,是通過電動機的旋轉運動,經皮帶輪或聯軸器、傳動軸、偏心套的傳動,使破碎壁繞一固定點作旋擺運動,從而使破碎圓錐的破碎壁時而靠近又時而離開固裝在調整套上的扎臼壁表面,使礦石在破碎腔內不斷受到沖擊,擠壓和彎曲作用而實現礦石的破碎。
        該機具有破碎力巨大、效率高、運作成本低、間隙調整方便和產品粒度均勻等優點,適用于中等和中等以上硬度、進料粒度≤300mm、出料粒度≤65mm石料的破碎。破碎腔型式由礦石用途決定,標準型運用于中碎;中型適用于中細碎;短頭型適用于細碎(具體進出料粒度要根據石料硬度并通過選擇機型來確定)。
        新型圓錐式破碎機采用多缸液壓清腔系統,降低操作勞動強度。采用液壓蝶簧缸及機械雙鎖緊方式,使鎖緊更加可靠。每種規格的腔型多,能更好滿足用戶的不同需求。采用可補償式潤滑脂密封,最大限度避免粉塵對潤滑油的污染,使整機各零部件工作更加可靠,延長使用壽命。采用多組彈簧結構的安全保險系統,可使鐵塊等不可破碎物通過破碎腔而不危害破碎機,使用更加安全可靠。

        New Type Cone Crusher :
        New type cone crusher works in this way: The electromotor of the cone crusher drives the mantle to make periodic swing movement around  a fixed point through the pulley ,   coupling,  transmission  shaft  and eccentric  sleeve ;  and consequently the surface of the mantle approaches and leaves the surface of the concave fixed on the adjusting sleeve  now and then. So that the stones are continuously impacted , squeezed , bent and finally crushed inside the crushing  cavity. 
         The machine has the following advantages: huge crushing force, high  production  efficiency, low operational cost ,convenient to adjust the space between the mantle and the concave as well as  uniform  product sizes. It is suitable for crushing  stones with   medium or over medium hardness  and with feeding sizes of no more than 300 mm and discharging  sizes of  no more than 65 mm. The type of the crushing cavity can be decided by the stone crushing requirements . The standard type is applied to medium  crushing; the medium type is applied to medium  or fine crushing;the short head type is applied to fine crushing(however, the specific feeding and discharging sizes  should be decided by the  stone hardness and by choosing crusher models .).
        The labor strength of workers has been reduced by adopting a multi-cylinder hydraulic  chamber clearing system. Locking  becomes  more reliable with two ways of locking, namely hydraulic butterfly spring cylinder locking and mechanic locking. Various  types of crushing cavity can meet the users'  different  requirements. Dust pollution to the lubricating oil   has been  avoided maximally  by adopting compensable grease  sealing, so that    all parts of the crusher can operate more reliably and serve for  longer  lives. The safety system consisting of  multi-group springs allows unbreakable matters such as  iron blocks go through the crushing cavity without damage to the crusher, resulting  to  safer and  more reliable operation .

       

      技術參數 Technical  parameters

       

      型號規格
      Type

      腔型
      Cavity type

      破碎錐直徑
      Mantle
      diameter

      進料粒度
      Feed
      size

      排料范圍
      Discharge
      range

      生產能力
      Capacity

      電機功率
      Electromotor
      speed

      重量
      Weight

      外型尺寸
      Exterior
      Dimensions


      Remarks

      (mm)

      (mm)

      (mm)

      (t/h)

      (kw)

      (t)

      長寬高(m)
      L×W×H (m)

      PSGB-1620

      標準細型
      Standard fine type

      1676

      ≤178

      16-38

      181-327

      220

      43.3

      3.94×2.95×3.77

      配電機、啟動柜
      Motor and starter cabinet configured

      PSGB-1624

      標準中型
      Standard
      medium
      type

      ≤205

      22-51

      258-417

      PSGB-1626

      標準粗型
      Standard
      crude type

      ≤228

      25-64

      299-635

      PSGB-1636

      標準特粗型
      Standard
      Specially
      crude type

      ≤313

      38-64

      431-630

      PSGD-1607

      短頭細型
      Fine short head type

      ≤60

      5-13

      90-209

      43.9

      PSGD-1608

      短頭中型
      Medium
      short head type

      ≤76

      6-19

      136-281

      PSGD-1613

      短頭粗型
      Crude short head type

      ≤113

      10-25

      190-336

      PSGD-1614

      短頭特粗型
      Specially crude short head type

      13-25

      253-336

      PSGB-1313

      標準細型
      Standard fine type

      1295

      ≤115

      13-31

      109-181

      160

      22.5

      2.98×1.87×3.16

      配電機、啟動柜
      Motor and starter cabinet configured

      PSGB-1321

      標準中型
      Standard medium type

      ≤178

      16-38

      132-253

      PSGB-1324

      標準粗型
      Standard
      crude type

      ≤205

      19-51

      172-349

      PSGB-1325

      標準特粗型
      Standard
      Specially
      crude type

      ≤220

      25-51

      236-358

      PSGD-1306

      短頭細型
      Fine short head type

      ≤54

      3-16

      36-163

      22.6

      PSGD-1308

      短頭中型
      Medium
      short head type

      ≤76

      6-16

      82-163

      PSGD-1310

      短頭粗型
      Crude short head type

      ≤89

      8-25

      109-227

      PSGD-1313

      短頭特粗型
      Specially crude short head type

      ≤113

      16-25

      209-236

      PSGB-0910

      標準細型
      Standard fine type

      914

      ≤85

      9-22

      45-91

      75

      9.9

      2.66×1.64×2.24

      配電機、啟動柜
      Motor and starter cabinet configured

      PSGB-0917

      標準粗型
      Standard
      crude type

      ≤150

      13-38

      59-163

      PSGB-0918

      標準特粗型
      Standard
      Specially
      crude type

      ≤150

      25-38

      118-163

      PSGD-0904

      短頭細型
      Fine short head type

      ≤35

      3-13

      27-90

      10.6

      PSGD-0906

      短頭中型
      Medium
      short head type

      ≤65

      3-16

      27-100

      PSGD-0907

      短頭粗型
      Crude short head type

      ≤85

      6-19

      59-129

       
      友情鏈接&Friendly Link
      在線咨詢
      Inquiry Online
      国产女人大象蕉视频在线观看,亚洲欧美日韩高清专区在线,亚欧美日韩香蕉在线大全,欧美第一黄网免费网站

    1. <strike id="sbcr7"></strike>
      <tr id="sbcr7"></tr>
    2. <th id="sbcr7"></th>